danST Engineering are pleased to be able to offer this complete bolt on kit for the BMC/Austin A series Engine (998cc/1000cc/1275cc). The package consists of the following:

 

1x TIG welded danST Engineering Aluminium inlet Manifold

1x Set of ZZR600 37mm Keihin Carburettors (ultrasonically cleaned, rebuilt into a pair)

1x Spun Aluminium Trumpet kit (pair of trumpets, to suit Keihin ZZR600 carbs as pictured)

1x danST Engineering Carb Fitting Kit (2x Fluoro lined silicone hoses and 4x stainless mikalor clamps) in red, blue or black

 

This kit is ideal for anyone wanting to carry out the popular bike carb modification as an alternative to the old weber twin 40 and SU style carbs. Bike carbs offer excellent performance, reliability and fuel economy when compared to the weber and SU alternatives. These conversions provide a low cost, simple power upgrade not to mention a fantastic soundtrack!

All danST supplied carburettors undergo a comprehensive inspection, strip, ultrasonic clean and rebuild process as required. Every set of carburettors are run on our dedicated test rig to ensure smooth idle and transition to higher RPM (see our youtube channel for running examples). We provide the carbs with base settings (and necessary jets) to allow you to get your engine up and running/driving. However these settings are only approximate and it is therefore essential that the carb jetting is set up by a competent engineer/mechanic using the necessary wide band AFR equipment (ideally on a rolling road) to avoid engine damage.

The manifold is manufactured from high quality aluminium with a precision Water Jet cut 10mm thick flange and TIG welded 38mm (Outside Dia) runners with a 3mm thick wall. All internal joints are fully ported/ground to ensure a smooth flow.

Write a review

Note: HTML is not translated!
   Bad           Good

A-Series Bike Carb Conversion Starter Pack

  • £541.67

  • Ex Tax:£541.67

Available Options


Related Products

Nodiz Pro Ignition ECU (Gen X)

Nodiz Pro Ignition ECU (Gen X)

The innovative Nodiz Pro Ignition Management ECU. Ideal for use alongside our bike carb kits or..

£275.00 Ex Tax:£275.00

Throttle Cable Kit for Bike Carbs & Throttle Bodies

Throttle Cable Kit for Bike Carbs & Throttle Bodies

A throttle cable kit designed to suit all bike carburetor installations, consisting of: 2m Long I..

£20.83 Ex Tax:£20.83

Nodiz Pro Ignition ECU, Ford Zetec Plug and Play Pack (Gen X)

Nodiz Pro Ignition ECU, Ford Zetec Plug and Play Pack (Gen X)

PRELOOMED/PREMAPPED NODIZ ZETEC SYSTEM If you have the factory Coil Pack and Crank Sensor on your..

£275.00 Ex Tax:£275.00

FSE Sytec EFI Fuel Pump suitable for Bike Throttle Body Conversions

FSE Sytec EFI Fuel Pump suitable for Bike Throttle Body Conversions

FSE Sytec EFI fuel pump suitable for our danST individual throttle body conversions also a reliable ..

£75.00 Ex Tax:£75.00

Nodiz Pro Ignition ECU, Vauxhall Plug and Play Pack (Gen X)

Nodiz Pro Ignition ECU, Vauxhall Plug and Play Pack (Gen X)

PRELOOMED/PREMAPPED NODIZ Vauxhall SYSTEM If you have the factory Coil Pack and Crank Sensor..

£275.00 Ex Tax:£275.00

Throttle Cable LINKAGE Kit for Bike Carbs & Throttle Bodies

Throttle Cable LINKAGE Kit for Bike Carbs & Throttle Bodies

A throttle Linkage kit designed to suit our bike carburettor or throttle body installation..

£16.67 Ex Tax:£16.67