Your shopping cart is empty!
FSE Sytec (Malpassi) Brand adjustable fuel pressure regulator for applications where the vehicle is to be converted from fuel injection to carburettor, regulating fuel pressure from a maximum of 88psi down to 2psi. This regulator does require a return line to the tank to relieve the excess flow/pressure. Also features a vacuum port enabling manifold pressure sensing if required.
An ideal regulator for use with our bike carburettor kits - meaning that the old injection pump (often in-tank) can be retained and thus much simplifying the conversion. NOT suitable for throttle body conversions (EFI) - please see our other regulators.
A video guide explaining the function of this product can be seen here:
Lovely Lotus Europa powered by a 20v 4AGE on danST ZX9R carbs on the Dyno....
0 reviews / Write a review
Bike carburettors are very sensitive to fuel pressure and require only a low pressure supply of 2-3p..
£58.33 Ex Tax:£58.33
FSE Sytec EFI fuel pump suitable for our danST individual throttle body conversions also a reliable ..
£75.00 Ex Tax:£75.00
These injector bosses are intended for anyone fabricating an inlet manifold and requiring a set of b..
£25.00 Ex Tax:£25.00
This set of 4-off injector blanking plugs is intended to blank (close off) the injector bores in a c..
This set of 6-off injector blanking plugs is intended to blank (close off) the injector bores in a c..
£37.50 Ex Tax:£37.50
This long-rod piston kit has been developed to increase reliability and power from the Duratec..
£1,300.00 Ex Tax:£1,300.00
This is set of 4 Duratec 2.0/2.3/2.5 engine injector port blanking plugs. They are used to blank (cl..
Tags: Fuel Pump