Bike carburettors are very sensitive to fuel pressure and require only a low pressure supply of 2-3psi. For this reason the simplest, cheapest and most effective solution is to utilise a motorcycle fuel pump - precisely the type of pump that the carburettors were designed to work alongside. A simple inline installation and two wire connection makes this component an easy install and eliminates the need for a costly fuel pressure regulator. These 'interruptor' type pumps deliver fuel at exactly the rate required by the carburettors.

This pump should be mounted horizontally, close to the fuel tank and as low down as possible.

FAILURE TO USE PRE-FILTER MAY DAMAGE THE PUMP AND INVALIDATE THE WARRANTY 

Options:

Fuel Pump Bracket. A 3D printed Saddle for mounting the pump on a flat surface. The bracket avoids the installer needing to fabricate a bracket and comes with all required fasteners. 

We can combine this with any number of accessories to help you in your bike carb conversion, manifolds, carbs, bike pumps, fluoro hose kits, cables, air filters etc......