This is a packaged designed to be purchased with one of our bike carburettor starter packs and includes everything you will need to run your carburettors except for an ECU.

Package Contents:

1x Linkage kit designed to adapt an existing cable,

1x Pipercross air filter and base plate,

1x Fuel Pump

1x Sytec Fuel Filter.

Options:

Supply FPR-014 in place of the Fuel Pump.  The standard supplement pack  contains a low pressure pump for use with motorcycle carburettors. However in some installations (newer cars originally fitted with mechanical or electronic fuel injection it may be preferable to re-use the existing fuel pump (saving on re-wiring and plumbing a new pump). In this case we can supply the FPR-014 regulator to bring the high pressure of the EFI system (45-60psi) down to 2-3psi. The regulator can be easily installed in the engine bay and utilise the existing flow and return lines to the tank. In some cases the return line to the tank may need to be enlarged to ensure adequate flow if the pressure cannot be reduced sufficiently on the existing return line. 

Please note that if you are ordering this package without ordering a carb kit from us, we request you add a comment of what carburettors you have otherwise we won't be able to send out your order.

If you have any spacing requirements please also leave a note so we can pick out a filter and base plate accordingly.