An Inlet Manifold for fitment to the Ford Zetec E engine (1.6/1.8/2.0 blacktop and silvertop), TIG welded in aluminium and fully internally ground to ensure optimum flow and performance. This manifold is designed for the SU Carbs. The spacing between carbs is 186mm, however this can be adjusted if required (depending on your linkage). Ideal for somebody wanting to fit a Zetec engine into an MG B while wanting to retain some originality by using Twin SU carburettors on the engine.

NOT suitable for Zetec SE/Sigma engines (see our other items for this application).

NOT suitable for ST170 engine (see our other items for ST170 Specific parts).

 

The manifold includes a single servo connection - these can be blanked off if not required, please advise when ordering.

 

Technical drawings are available on request and custom lengths and heights can be accomodated, please message us with your requirements.

 

This item is made to order and therefore on a 10 working day lead time. If you require any additional vacuum take-offs adding to the manifold or a coolant connection these are easily added - please contact us.

Write a review

Note: HTML is not translated!
   Bad           Good

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Twin SU Carburettors

  • £250.00

  • Ex Tax:£250.00

Related Products

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

An Inlet Manifold for fitment to the Ford Zetec E engine (1.6/1.8/2.0 blacktop and silvertop), TIG w..

£245.00 Ex Tax:£245.00

Ford ST170 Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

Ford ST170 Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

An Inlet Manifold for fitment to the Ford ST170 engine, TIG welded in aluminium and fully internally..

£245.00 Ex Tax:£245.00

Ford ST170 Inlet Manifold to Suit Jenvey/Weber Throttle Bodies, 20degs

Ford ST170 Inlet Manifold to Suit Jenvey/Weber Throttle Bodies, 20degs

An Inlet Manifold for fitment to the Ford ST170 engine, TIG welded in aluminium and fully internally..

£245.00 Ex Tax:£245.00

Toyota 3SGE rev 3 Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

Toyota 3SGE rev 3 Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

An Inlet Manifold for fitment to the Toyota 3SGE Rev 3 engine. TIG welded in alu..

£245.00 Ex Tax:£245.00

Toyota 3SGE rev 2 Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

Toyota 3SGE rev 2 Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

An Inlet Manifold for fitment to the Toyota 3SGE Rev 2 engine. TIG welded in alu..

£245.00 Ex Tax:£245.00

Ford Zetec E Inlet Manifold to Suit Jenvey/Weber Throttle Bodies, 20degs

Ford Zetec E Inlet Manifold to Suit Jenvey/Weber Throttle Bodies, 20degs

An Inlet Manifold for fitment to the Ford Zetec E  engine (1.6/1.8/2.0 blacktop and silvertop),..

£245.00 Ex Tax:£245.00

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Jenvey SF and KMS Individual Throttle Bodies

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Jenvey SF and KMS Individual Throttle Bodies

An Inlet Manifold for fitment to the Ford Zetec E engine (1.6/1.8/2.0 blacktop and silvertop), TIG w..

£245.00 Ex Tax:£245.00

Tags: Jenvey, Zetec, Weber, Zetec, Ford, focus, mondeo, xr2, escort, mk1, mk2, Westfield, Tiger, Striker, locust