An Inlet Manifold for fitment to the Ford ST170 engine, TIG welded in aluminium and fully internally ground to ensure optimum flow and performance. This manifold is designed for the standard Weber DCOE Carb mounting and can be made with 40mm, 45mm or 48mm bore mounting plates. The spacing between carbs 2-3 is 93mm, however this can be adjusted if required (depending on your linkage). Likewise the 'lift' or 'H' dimension can be adjusted as required.

Please specify carb/throttle body port size (40/45/48mm), if this hasnt been specified we will automatically send a 45mm port.

 

This manifold uses a specific plate that exactly matches the revised ports on this engine (larger and higher than the standard Zetec).

 

The manifold includes a single servo connection - these can be blanked off if not required, please advise when ordering.

 

Technical drawings are available on request and custom lengths and heights can be accomodated, please message us with your requirements.

 

This item is made to order and therefore on a 10 working day lead time. If you require any additional vacuum take-offs adding to the manifold or a coolant connection these are easily added - please contact us.

Write a review

Note: HTML is not translated!
   Bad           Good

Ford ST170 Inlet Manifold Inlet Manifold to Suit Jenvey's or DCOE's

  • £245.00

  • Ex Tax:£245.00

Available Options


Related Products

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Twin Weber IDF Downdraft Carburettors

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Twin Weber IDF Downdraft Carburettors

An Inlet Manifold for fitment to the Ford Zetec E engine (1.6/1.8/2.0 blacktop and silvertop), TIG w..

£270.00 Ex Tax:£270.00

Ford YB Cosworth Inlet Manifold Inlet Manifold to Suit Twin Weber IDF Downdraft Carburettors

Ford YB Cosworth Inlet Manifold Inlet Manifold to Suit Twin Weber IDF Downdraft Carburettors

An Inlet Manifold for fitment to the Ford YB engine (2.0 16v Cosworth), TIG welded in aluminium..

£270.00 Ex Tax:£270.00

Ford Pinto Inlet Manifold Inlet Manifold to Suit Twin Weber IDF Downdraft Carburettors

Ford Pinto Inlet Manifold Inlet Manifold to Suit Twin Weber IDF Downdraft Carburettors

An Inlet Manifold for fitment to the Ford Pinto SOHC Engine, TIG welded in aluminium and fully inter..

£270.00 Ex Tax:£270.00

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Twin Weber DCNF Downdraft Carburettors

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Twin Weber DCNF Downdraft Carburettors

An Inlet Manifold for fitment to the Ford Zetec E engine (1.6/1.8/2.0 blacktop and silvertop), TIG w..

£270.00 Ex Tax:£270.00

Ford ST170 Inlet Manifold to suit Jenvey SF and KMS individual Throttle Bodies

Ford ST170 Inlet Manifold to suit Jenvey SF and KMS individual Throttle Bodies

An Inlet Manifold for fitment to the Ford ST170 VVT Engine, TIG welded in aluminium and fully intern..

£245.00 Ex Tax:£245.00

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Twin SU Carburettors

Ford ZETEC E Inlet Manifold Inlet Manifold to Suit Twin SU Carburettors

An Inlet Manifold for fitment to the Ford Zetec E engine (1.6/1.8/2.0 blacktop and silvertop), TIG w..

£250.00 Ex Tax:£250.00

Tags: Jenvey, ST170, Weber