ME221 Gen2 Standalone Fuel Injection ECU For Vauxhall engines


The ME221 Wire-In ECU is a feature rich and future proof four cylinder injection engine management system. Built from the ground up using the latest control strategies means a modern, powerful, VE based ECU, with enhanced feature set including closed loop boost, in-built Wideband Lambda Control, DSP Knock Control, on-board data Logging and VVT control – all in a compact form factor. Massive IO means the ME221 can handle anything thrown at it, and custom tables means any specific algorithms required can be easily derived.

The ECU comes complete with a fully terminated Vauxhall/GM C20XE/LET loom to get you up and running in no time. It is suitable for either the stock inlet, or throttle bodies.

Tuning Software (MEITE)

  • Intuitive, developed with real-world feedback from 100’s of tuners
  • Everything real-time adjustable
  • Diagnostics and analysis functionality
  • Custom layouts, tabs and functions
  • In-built firmware update tool for ease-of-use
  • Custom “part calibration” import – use settings from other maps in a current map
  • Offline Editing of calibrations
  • Real-time tracing
  • Data-logging of all variables and Auto-Tune


Fuelling Control

  • Configurable Load/RPM BINS 16×16, 32 bit floating point Tables
  • Multiple Fuel Tables
  • Injection Angle
  • Priming Pulse Settings and Crank Pulse Settings
  • Cranking Enrichment
  • After-Start Enrichment and ASE Time Decay
  • Warm-Up Enrichment
  • Acceleration Enrichement TPS/MAP based with Coolant Modifier
  • IAT Correction Table
  • Idle Trims
  • 16×16 AFR Target Table factored into VE Equation
  • Speed-Density/Alpha-N with optional Blending
  • Injector Voltage Offset Table
  • Overrun Fuel Cut
  • Closed Loop Narrow-band/Wide-band Lambda control with Bosch LSU4.9 Controller On-Board
  • Flex-Fuel secondary tables


Ignition Control

  • 16×16 32bit Table
  • Closed Loop DSP Windowed Knock Control On-board
  • Battery Voltage Dwell Correction 16×16 Table
  • Individual Cylinder Trimming
  • IAT and Coolant Trim
  • Spark-Scatter Ignition Idle Control
  • Flex-Fuel Control
  • Switchable Ignition Tables


Crank/Cam Triggering

  • VR/Hall/Opto Inputs as required
  • Auto-scaling, Parametric Noise Rejection
  • Range of OEM Patterns Supported


Idle Control

  • PWM based Closed/Open/Manual Diagnostic Modes
  • 4-wire Stepper based idle control
  • Cranking/Return to idle Settings reference Open-Loop table for wide-control
  • AC/Fan Auto-Idle Up Settings
  • PID Based for Accuracy
  • Fuel Modifiers
  • Ignition Spark Scatter
  • Jacked-Throttle Miss-Bang Idle Mode (Group-N ALS)


Knock Control

  • DSP Angular Windowed Knock Control
  • Settable Gains, Offset and Window Duration
  • Step Retard and Fail-Safe


Boost Control

  • Closed/Open Loop Boost Control by 16×16 RPM and Throttle table
  • Boost-by-Gear
  • Switchable Boost Tables
  • Over-Boost Protection
  • Pre-Start Duties
  • Anti-Lag Group-N


Variable Valve Timing

  • Fully Closed Loop PWM (Throttle X RPM table)
  • Dual Cam Support
  • Locked Angle or Locked Duty testing modes
  • Basic On/Off Mode (Honda V-Tec)
  • Supported patterns include MX5 2001-2005 and Ford ST170, Ford Puma 1.7
  • PID Tuning with Oil Temperature triggering & safeties
  • Programmable Rest State & Offset compensation


General Purpose Tables

  • 6x General Purpose Tables
  • Custom Variables and Outputs
  • Modify Fuel, Ignition, Boost and Idle strategies from the GPTs
  • 3D and 2D tables with ability to “chain” tables together for create complex functions


Communications

  • Industry Preferred RS232 for ECU mapping/communication (USB Adaptor available)
  • CAN-Bus on some models
  • USB on some models


Processing Power

  • 120Mhz 32-bit RISC Processor
  • Ignition Accuracy to 0.01 degrees, Fuelling to 0.001mS
  • 32-bit maths and tables (Table entries can have 8 decimal places for very high resolution)
  • ADCs/Analogue data reported to 16-bit accuracy
  • 20,000+ RPM


Analogue/Digital Inputs

  • Configurable “HRT”‘s for every analogue channel – use any sensor. Basemaps pre-set for factory sensors.
  • Wide-band O2 LSU4.9 Controller Built In
  • TPS, IAT, CLT, MAP, Lambda standard inputs
  • Selectable feature for digital/analogue inputs
  • Spare/unused analogue lines can be used for general purpose tables or digital switches


Environmental & Physical

  • Automotive -20 – 85*C
  • Voltage 5.5-28V
  • Operating Current Approx 120mA @ 13v
  • Electrically isolated and protected inputs/outputs
  • 90 Way Automotive Connector
  • IP67 Sealed Alloy Casing


DataLogging

  • 4Gb On-board Data logging – over 2,000 Hours of all variables
  • Unlimited PC based logging via MEITE
  • User settable Triggers and markers

 

What is in the box:

1 x Standalone ME221 Engine Control Unit (ECU)

1 x Vauxhall C20XE/LET Fully Terminated Loom



Options


Coolant and air temperature sensors. The ME221 and MEITE software do offer the ability to calibrate the ECU to read any sensor, however by using the sensors on offer in this listing the standard calibration tables can be used - vastly simplifying the set-up process and saving considerable time. Both sensors are M12 x 1.5 thread. The additional coolant temperature sensor housing offers a quick and convenient method for installing directly into a radiator top hose and negates the need for tapping out existing holes in your cylinder head.

Crank Sensor. The ME221 ECU requires inputs from a crank position sensor. Therefore if your engine is not equipped with a sensor you will need to mount a suitable sensor, along with a trigger wheel on your front pulley. We list a range of universal trigger wheels in our shop.

Data Cable (FTDI USB-Serial Adaptor). Whilst the ECU comes with an RS232 cable many modern Laptops do not have such a connection. Therefore this adaptor will allow a USB port to be used for connectivity. This genuine FTDI cable is guaranteed to work with this ECU, unlike many cheaper alternatives that often suffer connectivity issues.


Basemaps


ALL ME221 and ME442 ECU's are shipped with a test map only. This is highly unlikely to run your engine and if it does it will not run it very well! A library of basemaps can be found here on the Motorsport Electronics Support Pages as well as a full suite of installation manuals. danST Engineering can also provide basemaps for a variety of engines developed on our in-house rolling road.


Coil Pack Compatibility


This ECU is intended for use with wasted spark Vauxhall coil packs. Other wasted spark coil packs may be compatible however please contact us before attempting to use alternatives to avoid potential damage to the ECU. The fitment of a Vauxhall coil pack (available in our shop) will guarantee compatibility and reliability.


Note: As with all after-market engine management systems (ECU’s) a dyno tuning is recommended to avoid damaging your engine and to get the most out of your engine.

 

Write a review

Note: HTML is not translated!
   Bad           Good

ME221 Gen2 Standalone Fuel Injection ECU For Vauxhall Engines

  • £745.82

  • Ex Tax:£745.82

Available Options


Related Products

Connector plug for Suzuki GSXR1000 Keihin Injector (x4), GSXR1300 Hayabusa

Connector plug for Suzuki GSXR1000 Keihin Injector (x4), GSXR1300 Hayabusa

Connector for Suzuki GSXR1000 Keihin Injectors, GSXR600, GSXR750, GSXR1300 Hayabusa   A s..

£12.50 Ex Tax:£12.50

Connector Plug for Suzuki K7-K8 GSXR1000 Mikuni Injector Connector Plugs (x4)

Connector Plug for Suzuki K7-K8 GSXR1000 Mikuni Injector Connector Plugs (x4)

Connector plug for Suzuki K7-K8 GSXR1000 Mikuni Injector   A set of 4 new female injector..

£12.50 Ex Tax:£12.50

Connector Plug for Mikuni (Denso) Injectors GSXR750SRAD, ZX10R,ZX12R and ZX14R (x4)

Connector Plug for Mikuni (Denso) Injectors GSXR750SRAD, ZX10R,ZX12R and ZX14R (x4)

Connector Plug for Mikuni (Denso) Injectors   A set of 4 new female injector plugs to sui..

£12.50 Ex Tax:£12.50

Coolant Temperature Sensor for use with the ME221

Coolant Temperature Sensor for use with the ME221

An aftermarket coolant temperature sensor for use with the ME221 ECU. The ME221 comes calibrate..

£19.99 Ex Tax:£19.99

Ford Zetec 1.8/2.0 Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

Ford Zetec 1.8/2.0 Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford Zetec&..

£1,600.00 Ex Tax:£1,600.00

ME221 Gen2 Standalone Fuel Injection ECU & Universal Unterminated Loom

ME221 Gen2 Standalone Fuel Injection ECU & Universal Unterminated Loom

ME221 Standalone Wire-In ECU. The ME221 Wire-In ECU is a feature rich and future proof four cylin..

£620.83 Ex Tax:£620.83

Air Temperature Sensor for use with the ME221

Air Temperature Sensor for use with the ME221

An aftermarket air temperature sensor for use with the ME221 ECU. May also be suitable for..

£19.99 Ex Tax:£19.99

Genuine FTDI Serial Cable For use with the ME221 & ME360

Genuine FTDI Serial Cable For use with the ME221 & ME360

Genuine working and tested FTDI Serial->USB adapter cable for use with Motorsport Electronic ECUs..

£24.17 Ex Tax:£24.17

Ford Zetec SE 1.4/1.6/1.7 Bike Throttle Bodies, GSXR 38mm *FAST ROAD PACK*

Ford Zetec SE 1.4/1.6/1.7 Bike Throttle Bodies, GSXR 38mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford Zetec ..

£1,600.00 Ex Tax:£1,600.00

Vauxhall C14SE Inlet Manifold to suit ZX10R (K6-) Throttle Bodies

Vauxhall C14SE Inlet Manifold to suit ZX10R (K6-) Throttle Bodies

An Inlet Manifold for fitment to the Vauxhall C16SE and C14SE engine, TIG welded in alumin..

£225.00 Ex Tax:£225.00

ME221 Standalone Fuel Injection ECU, Ford Zetec Plug and Play Pack

ME221 Standalone Fuel Injection ECU, Ford Zetec Plug and Play Pack

ME221 Standalone Fuel Injection ECU, Ford Zetec Plug and Play Pack The ME221 Wire-In ECU is a fea..

£745.82 Ex Tax:£745.82

Coolant Temperature Sensor and housing for use with NODIZ & ME221, *SILVER*

Coolant Temperature Sensor and housing for use with NODIZ & ME221, *SILVER*

An aftermarket Bosch style coolant temperature sensor complete with anodised silver 3..

£33.33 Ex Tax:£33.33

Ford Pinto 1600-2300 Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

Ford Pinto 1600-2300 Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford Pinto engin..

£1,600.00 Ex Tax:£1,600.00

Ford Crossflow 1300-1700 Bike Throttle Bodies Kit GSXR600 38mm *FAST ROAD PACK*

Ford Crossflow 1300-1700 Bike Throttle Bodies Kit GSXR600 38mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford Crossflow e..

£1,600.00 Ex Tax:£1,600.00

Ford CVH Bike Throttle Bodies Kit GSXR600 38mm *FAST ROAD PACK*

Ford CVH Bike Throttle Bodies Kit GSXR600 38mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford CVH en..

£1,600.00 Ex Tax:£1,600.00

VW 1.8 16v KR, PL & 2.0 ABF, AAL, 9A Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

VW 1.8 16v KR, PL & 2.0 ABF, AAL, 9A Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the VW 1.8 16v KR, P..

£1,600.00 Ex Tax:£1,600.00

VW Polo 1.4 16v & Lupo Sport AFH Bike Throttle Bodies Kit GSXR600 38mm *FAST ROAD PACK*

VW Polo 1.4 16v & Lupo Sport AFH Bike Throttle Bodies Kit GSXR600 38mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the VW Polo 16v &..

£1,600.00 Ex Tax:£1,600.00

VW 1.8 EX, DX and PB Golf Bike Throttle Bodies Kit GSXR600 38mm *FAST ROAD PACK*

VW 1.8 EX, DX and PB Golf Bike Throttle Bodies Kit GSXR600 38mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the VW 1.8 EX, DX an..

£1,666.67 Ex Tax:£1,666.67

Honda B16 Individual Throttle Bodies Kit 42mm *FAST ROAD PACK*

Honda B16 Individual Throttle Bodies Kit 42mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Honda B16 DOHC V..

£1,600.00 Ex Tax:£1,600.00

Honda D14/D16 Individual Throttle Bodies Kit 42mm *FAST ROAD PACK*

Honda D14/D16 Individual Throttle Bodies Kit 42mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Honda D16 SOHC V..

£1,600.00 Ex Tax:£1,600.00

Coolant Temperature Sensor for use with Omex 600 ECU

Coolant Temperature Sensor for use with Omex 600 ECU

An aftermarket coolant temperature sensor for use with the Omex 600 ECU. The 600 comes calibrat..

£19.99 Ex Tax:£19.99

Map Sensor, 3 Bar Cosworth Type

Map Sensor, 3 Bar Cosworth Type

This is a Cosworth style 3-Bar MAP sensor, used for measuring manifold pressure. Capable of reading ..

£29.17 Ex Tax:£29.17

ME221 Standalone Fuel Injection ECU, Ford 1600 & 1700 Zetec SE, Puma

ME221 Standalone Fuel Injection ECU, Ford 1600 & 1700 Zetec SE, Puma

ME221 Standalone Fuel Injection ECU, Ford 1600 & 1700 Zetec SE, Puma An ideal standalone ECU ..

£745.82 Ex Tax:£745.82

VW 2.0 8v ABA Bike Throttle Bodies Kit 38mm GSXR 600 *FAST ROAD PACK*

VW 2.0 8v ABA Bike Throttle Bodies Kit 38mm GSXR 600 *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the VW 2.0 ABA ..

£1,600.00 Ex Tax:£1,600.00

ME221 Gen2 Standalone Fuel Injection ECU ONLY

ME221 Gen2 Standalone Fuel Injection ECU ONLY

ME221 Standalone ECU ONLY. ME221 Gen2 Standalone Fuel Injection ECU For Vauxhall enginesThe ME221..

£537.50 Ex Tax:£537.50

Vauxhall C20XE 2.0 DCOE Individual Throttle bodies kit, All Diameters

Vauxhall C20XE 2.0 DCOE Individual Throttle bodies kit, All Diameters

A complete indivudual throttle body kit for the Vauxhall C20XE 2.0 'Redtop' engine, featur..

£892.66 Ex Tax:£892.66

Vauxhall X16XE, C16XE, Z16XE, C14XE, DCOE Individual Throttle bodies kit, All Diameters

Vauxhall X16XE, C16XE, Z16XE, C14XE, DCOE Individual Throttle bodies kit, All Diameters

A complete indivudual throttle body kit for the Vauxhall X16XE engine, featuring DCOE type..

£892.66 Ex Tax:£892.66

Vauxhall X20XEV Ecotec & Z22XE DCOE Individual Throttle bodies kit, All Diameters

Vauxhall X20XEV Ecotec & Z22XE DCOE Individual Throttle bodies kit, All Diameters

A complete indivudual throttle body kit for the Vauxhall X20XEV & Z22XE engine,&n..

£892.66 Ex Tax:£892.66

Vauxhall C14SE & C16SE DCOE Individual Throttle bodies kit, All Diameters

Vauxhall C14SE & C16SE DCOE Individual Throttle bodies kit, All Diameters

A complete indivudual throttle body kit for the Vauxhall C14SE & C16SE engine, featuri..

£892.66 Ex Tax:£892.66

Vauxhall C20NE 2.0 DCOE Individual Throttle bodies kit, All Diameters

Vauxhall C20NE 2.0 DCOE Individual Throttle bodies kit, All Diameters

A complete indivudual throttle body kit for the Vauxhall C20NE 2.0 engine, featuring DCOE ..

£892.66 Ex Tax:£892.66

Volkswagen ABA 2.0 DCOE Individual Throttle bodies kit, All Diameters

Volkswagen ABA 2.0 DCOE Individual Throttle bodies kit, All Diameters

A complete individual throttle body kit for the Volkswagen ABA 2.0 engine, featuring DCOE ..

£892.66 Ex Tax:£892.66

Connector Plug for Mikuni (Denso) Injectors GSXR750SRAD, ZX10R,ZX12R and ZX14R (x6)

Connector Plug for Mikuni (Denso) Injectors GSXR750SRAD, ZX10R,ZX12R and ZX14R (x6)

Connector Plug for Mikuni (Denso) Injectors   A set of 6 new female injector plugs to sui..

£18.75 Ex Tax:£18.75

Tags: ME221, Gen2, ECU, MOTORSPORT ELECTRONICS, C20XE, C20LET, X20XEV, Z22SE, Z20LET