An Inlet Manifold for fitment to the Ford mk5/mk6 RS2000 I4 Engine, TIG welded in aluminium and fully internally ground to ensure optimum flow and performance. This manifold is designed for the standard Weber/Jenvey DCOE mounting and can be made with 40mm, 45mm, 48mm or 50mm bore mounting plates. The spacing between Bodies 2-3 is 93mm, however this can be adjusted if required (depending on your linkage). 


Note - this manifold is not suitable for carburettors due to the 20deg angle. For the carb version please see our other items.

 Please specify carb/throttle body port size (40/45/48/50mm), if this hasnt been specified we will automatically send a 45mm port.

 The manifold includes a single servo connection - these can be blanked off if not required, please advise when ordering.

 This Manifold is also available with the 2.3 head plate with the additional coolant port on the end - please advise when ordering if you require this. 

 Technical drawings are available on request and custom lengths and heights can be accomodated, please message us with your requirements.

 This item is made to order and therefore on a 10 working day lead time. If you require any additional vacuum take-offs adding to the manifold or a coolant connection these are easily added - please contact us.

Write a review

Note: HTML is not translated!
    Bad           Good

Ford RS2000 I4 DOHC Inlet Manifold to Suit Jenvey/Weber DCOE's, 20deg

  • £225.00

  • Ex Tax: £225.00

Available Options


Related Products

Ford RS2000 I4 DOHC 37mm Bike Carburettor Starter Kit

Ford RS2000 I4 DOHC 37mm Bike Carburettor Starter Kit

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford 2.0 I4 DOHC..

£475.00 Ex Tax: £475.00

Ford RS2000 I4 DOHC Inlet Manifold for ZX7R &  ZX9R Carburettors

Ford RS2000 I4 DOHC Inlet Manifold for ZX7R & ZX9R Carburettors

An Inlet Manifold for fitment to the Ford mk5/mk6 RS2000 I4 Engine, TIG welded in aluminium and..

£183.33 Ex Tax: £183.33

Ford RS2000 I4 DOHC Inlet Manifold to Suit Jenvey/Weber DCOE Carburettors

Ford RS2000 I4 DOHC Inlet Manifold to Suit Jenvey/Weber DCOE Carburettors

An Inlet Manifold for fitment to the Ford mk5/mk6 RS2000 I4 Engine, TIG welded in aluminiu..

£225.00 Ex Tax: £225.00

Tags: Jenvey, RS2000, Galaxy, Ford, Weber, DCOE, DHLA, mk5, escort, mk6, Galaxy, 2.3, 2.0