10mm thick 5053 Aluminium CNC machined inlet manifold adapter plate to suit the Ford Duratec engine (not 2.5). This plate/stud arrangement allows the fitment of a Duratec inlet in the inverted orientation - this is useful when using certain aftermarket plenums that need to point the other way (eg Caterham inlet).


The kit consists of:

1 x DTEC-IFLANGE-002 Adapter Plate

6 x M8 Machine Screws


Port shape is that of the standard Duratc engine - due to the existing stud positions on the head the inlet will be raised by 3mm when using this plate. Therefore for best results a small amount (3mm ramp) will need to be removed from the bottom edge of the ports on the inlet that is to be fitted. However if you are looking for a quick solution you can of course bolt the manifold straight on, but ensuring smooth flow will get the best from your conversion. 

 

 

Write a review

Note: HTML is not translated!
    Bad           Good

Ford Duratec 1.8/2.0/2.3 Inlet Inverter Adapter Plate

  • £83.33

  • Ex Tax: £83.33

Related Products

Ford Duratec 1.8/2.0/2.3 Bike Throttle Bodies Kit ZX10R 44mm *STARTER PACK*

Ford Duratec 1.8/2.0/2.3 Bike Throttle Bodies Kit ZX10R 44mm *STARTER PACK*

danST Engineering are pleased to be able to offer this bolt on kit for the Ford Duratec engine ..

£716.66 Ex Tax: £716.66

Ford Duratec 1.8/2.0/2.3/2.5 DCOE Individual Throttle body kit, All Diameters

Ford Duratec 1.8/2.0/2.3/2.5 DCOE Individual Throttle body kit, All Diameters

A complete indivudual throttle body kit for the the Ford Duratec engine (1.8/2.0/2.3/2.5), ..

£1,052.00 Ex Tax: £1,052.00

Ford DURATEC 1.8 2.0 2.3 2.5 Engine Mounts, Locost, Westfield, MK

Ford DURATEC 1.8 2.0 2.3 2.5 Engine Mounts, Locost, Westfield, MK

A fully fabricated pair of engine mounts to mount  the popular Ford/Mazda Duratec HE into the ..

£99.99 Ex Tax: £99.99

Tags: Fiesta, ST, ST150, Duratec, Caterham, Locost