The ME221 MX-5 PnP is the latest plug-n-play Engine Management System for the Mk1 (2 Plug NA) MX-5 / Miata, years 1989-1995 1.6/1.8

This ECUs is ideal for use with our popular bike throttle body kits.

It supports the 1.6 and 1.8 model from the same hardware, and also fits the OEM case, which means the conversion installs tidily into the OEM position. The only extra thing you need to do besides plugging it in is run a MAP vacuum hose from the ECU to the intake manifold.

  • Uses the ME221 ECU Core (NXP Automotive Processing Power)
  • Supports factory sensors.
  • Truly Plug-In : Supports both switched TPS and linear TPS conversions.
  • 16×16 Fuel and Ignition Tables (with dual table switching)
  • VE based fuelling algorithm.
  • Run any type of high impedance injectors.
  • DSP Knock Control
  • In-built 60psi MAP sensor
  • Closed Loop Boost, Lambda and Idle Control
  • Launch Control
  • Fully Sequential on 1.8 version
  • In the field regular firmware updates and improvements
  • Uses the powerful MEITE tuning studio.
  • An open approach to firmware/software features.
  • Supplied with rolling road certified and developed basemaps for either turbo or NA setups.
 
Package contents:
  • ME221 PnP Core Board
  • Vacuum Hose
  • Stickers
Please note that if you are using a switched type TPS sensor as fitted to the 1.6 model, we suggest installing a variable TPS to give better throttle response - the 1.8 model already has the variable TPS as standard. Also, if you wish to run without a MAF sensor, then you will need to install an Intake Air Temperature Sensor - available in our shop.

Note: As with all after-market engine management systems (ECU’s) a dyno tuning is recommended to avoid damaging your engine and to get the most out of your engine. 

Further information, installation manuals and a library of basemaps can be found here on the Motorsport Electronics Support Pages

 

Write a review

Note: HTML is not translated!
   Bad           Good

ME221 Gen 2 Plug-in MX5 NA 89-95 (2 Plug) ECU

  • £579.17

  • Ex Tax:£579.17

Related Products

Connector plug for Suzuki GSXR1000 Keihin Injector (x4), GSXR1300 Hayabusa

Connector plug for Suzuki GSXR1000 Keihin Injector (x4), GSXR1300 Hayabusa

Connector for Suzuki GSXR1000 Keihin Injectors, GSXR600, GSXR750, GSXR1300 Hayabusa   A s..

£12.50 Ex Tax:£12.50

Connector Plug for Suzuki K7-K8 GSXR1000 Mikuni Injector Connector Plugs (x4)

Connector Plug for Suzuki K7-K8 GSXR1000 Mikuni Injector Connector Plugs (x4)

Connector plug for Suzuki K7-K8 GSXR1000 Mikuni Injector   A set of 4 new female injector..

£12.50 Ex Tax:£12.50

Connector Plug for Mikuni (Denso) Injectors GSXR750SRAD, ZX10R,ZX12R and ZX14R (x4)

Connector Plug for Mikuni (Denso) Injectors GSXR750SRAD, ZX10R,ZX12R and ZX14R (x4)

Connector Plug for Mikuni (Denso) Injectors   A set of 4 new female injector plugs to sui..

£12.50 Ex Tax:£12.50

Genuine FTDI Serial Cable For use with the ME221 & ME360

Genuine FTDI Serial Cable For use with the ME221 & ME360

Genuine working and tested FTDI Serial->USB adapter cable for use with Motorsport Electronic ECUs..

£24.17 Ex Tax:£24.17

Mazda MX5 mk1 NA 1800 Individual Throttle Body Kit 42mm, Eunos danST STARTER PACK

Mazda MX5 mk1 NA 1800 Individual Throttle Body Kit 42mm, Eunos danST STARTER PACK

Mazda MX5 mk1 NA 1800 Individual Throttle Body Conversion Kit danST STARTER PACK   d..

£764.17 Ex Tax:£764.17

Mazda MX5 NA 1600 & 1800 Individual Throttle Body Kit 42mm, 89-95 danST FAST ROAD PACK

Mazda MX5 NA 1600 & 1800 Individual Throttle Body Kit 42mm, 89-95 danST FAST ROAD PACK

Mazda MX5 NA 1.6/1.8 Individual Throttle Body Kit 42mm, 89-95 danST FAST ROAD PACK This Throttle ..

£1,400.00 Ex Tax:£1,400.00

Mazda MX5 mk2 NB 1800 Individual Throttle Body Kit 42mm, Eunos danST STARTER PACK

Mazda MX5 mk2 NB 1800 Individual Throttle Body Kit 42mm, Eunos danST STARTER PACK

Mazda MX5 mk2 NB 1800 Individual Throttle Body Conversion Kit danST STARTER PACK   d..

£764.17 Ex Tax:£764.17

Mazda MX5 NA/NB 1600 Bike Throttle Bodies Kit GSXR 40mm, Eunos danST STARTER PACK

Mazda MX5 NA/NB 1600 Bike Throttle Bodies Kit GSXR 40mm, Eunos danST STARTER PACK

Mazda MX5 NA/NB 1600 Bike Throttle Body Conversion Kit danST STARTER PACK   dan..

£764.17 Ex Tax:£764.17

Mazda MX5 mk1 1800 Inlet Manifold to suit Jenvey SF and KMS individual Throttle Bodies

Mazda MX5 mk1 1800 Inlet Manifold to suit Jenvey SF and KMS individual Throttle Bodies

An Inlet Manifold for fitment to the mk1 Mazda MX5 1800 engine, TIG welded in aluminium and fully in..

£245.00 Ex Tax:£245.00

Mazda MK1 NA MX5 1600 Inlet Manifold to suit Jenvey SF and KMS individual Throttle Bodies

Mazda MK1 NA MX5 1600 Inlet Manifold to suit Jenvey SF and KMS individual Throttle Bodies

An Inlet Manifold for fitment to the Mazda MX5 1600 engine, TIG welded in aluminium and fully intern..

£245.00 Ex Tax:£245.00

Mazda MX5 mk1 1800 Inlet Manifold to suit Toyota 20v Throttle Bodies, Eunos

Mazda MX5 mk1 1800 Inlet Manifold to suit Toyota 20v Throttle Bodies, Eunos

An Inlet Manifold for fitment to the Mazda MX5 1800 mk1 engine, TIG welded in aluminium and ful..

£245.00 Ex Tax:£245.00

Mazda MX5 mk2 1800 Inlet Manifold to suit Toyota 20v Throttle Bodies, Eunos

Mazda MX5 mk2 1800 Inlet Manifold to suit Toyota 20v Throttle Bodies, Eunos

An Inlet Manifold for fitment to the Mazda MX5 1800 mk2 engine, TIG welded in aluminium and ful..

£245.00 Ex Tax:£245.00

Mazda MK1 NA MX5 1600 Inlet Manifold Assembly to suit Toyota 20v Throttle Bodies

Mazda MK1 NA MX5 1600 Inlet Manifold Assembly to suit Toyota 20v Throttle Bodies

An Inlet Manifold and fuel rail assembly for fitment to the Mazda MX5 1600 engine, TIG welded in al..

£458.33 Ex Tax:£458.33

Mazda MX5 mk1 1800 Inlet Manifold to suit Weber/Jenvey DCOE Throttle Bodies

Mazda MX5 mk1 1800 Inlet Manifold to suit Weber/Jenvey DCOE Throttle Bodies

An Inlet Manifold for fitment to the mk1 Mazda MX5 1800 engine, TIG welded in aluminium and ful..

£245.00 Ex Tax:£245.00

Mazda MX5 mk1 1800 Inlet Manifold to suit Weber/Dellorto DCOE Carbs

Mazda MX5 mk1 1800 Inlet Manifold to suit Weber/Dellorto DCOE Carbs

An Inlet Manifold for fitment to the mk1 Mazda MX5 1800 engine, TIG welded in aluminium and ful..

£245.00 Ex Tax:£245.00

Mazda MX5 1.8 NA/NB DCOE Individual Throttle bodies kit, All Diameters

Mazda MX5 1.8 NA/NB DCOE Individual Throttle bodies kit, All Diameters

A complete individual throttle body kit for the the Mazda Mx5 1.8 engine (NA or NB please ..

£900.00 Ex Tax:£900.00

Toyota 4AGE 16v DCOE Individual Throttle bodies kit, All Diameters

Toyota 4AGE 16v DCOE Individual Throttle bodies kit, All Diameters

A complete individual throttle body kit for the the  Toyota 4age 16v small port ..

£862.66 Ex Tax:£862.66

Mazda MX5 1.6 NA/NB DCOE Individual Throttle bodies kit, All Diameters

Mazda MX5 1.6 NA/NB DCOE Individual Throttle bodies kit, All Diameters

A complete individual throttle body kit for the the Mazda Mx5 1.6 engine, featuring D..

£900.00 Ex Tax:£900.00

Connector Plug for Mikuni (Denso) Injectors GSXR750SRAD, ZX10R,ZX12R and ZX14R (x6)

Connector Plug for Mikuni (Denso) Injectors GSXR750SRAD, ZX10R,ZX12R and ZX14R (x6)

Connector Plug for Mikuni (Denso) Injectors   A set of 6 new female injector plugs to sui..

£18.75 Ex Tax:£18.75

Tags: ECU, MOTORSPORT ELECTRONICS, miata, eunos, ME221, ME442