An inlet manifold to suit the Porsche 944 S2 and 968 3.0 16V engines. TIG welded in aluminium and fully internally ground to ensure optimum flow and performance. This manifold is designed for the standard Weber DCOE style mounting and therefore will suit a multitude of throttle bodies such as Jenvey, KMS, Omex and AT Power. This manifold can be made with 45mm, 48mm or 50mm bore mounting plates. The spacing between throttle bodies 2-3 is 154mm (choke centre distance) to achieve equal length runners on all four cylinders. The throttle bodies are mounted with the fuel rail on the underside as standard to aid bonnet clearance. If this is not desired please advise when ordering but please be aware that bonnet modifications may be required. 

Please also specify carb/throttle body port size, if this has not been specified we will automatically send a 50mm port.

The manifold includes a single servo connection - these can be blanked off if not required, please advise when ordering.

Technical drawings are available on request and custom lengths and heights can be accommodated, please message us with your requirements.

This item is made to order and therefore on a 10 working day lead time. If you require any additional vacuum take-offs adding to the manifold or a coolant connection these are easily added - please contact us.