danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet. Features:

 

45mm Bore

75mm Outer Diameter at Radius End

Jenvey/Weber Lower Mounting Flange (65mm Hole Centers)

Lightweight Aluminium Construction

Natural Polished Aluminum Finish

Length 25/50/90mm -  Please specify using the drop down menu (If no drop down is available i.e ebay listings, please specify length in notes during checkout)

danST Engineering began manufacturing these trumpets due to a shortage of available and reasonably priced trumpets for fitment on our specialist carb and throttle body conversions. We can supply aftermarket velocity stack kits for a variety of bike carburettors and throttle bodies, please see our other listings or contact us for more info.

These trumpets are also a universal design - the flange suits Jenvey and Weber type bolt down fitment with 65mm hole centers. The flange could also be cut off should you wish to connect to a throttle body with silicone hoses and jubilee clips.

 

Below are links to two different engines fitted with two popular bike carb kits (one 1800 zetec with R1 Mikuni carbs, one Ford 2.3 Duratec fitted with ZX9R carbs). The lower lines are both carb sets without trumpets and the higher lines are when fitted with our 50mm trumpets. In both cases significant performance increases (typically 5-9bhp) are seen between 3500-6000rpm when the carburettors are fitted with our trumpet kit. Additionally the torque curve is seen to be much smoother. Note that the Duratec is making peak power very low in the RPM range due to a very restrictive exhaust (soon to be replaced!), but the effect of the trumpets on engine performance is clear. We see so many bike carb conversions running without any trumpets (bike breakers often remove them along with the original bike airbox) - ALL of which would see the benefits highlighted below, probably the cheapest power you can find!

 

1800 Zetec on 40mm R1 Carbs, no trumpets vs danST 50mm trumpet kit

2300 Ford Duratec ZX9R Carbs, no trumpets vz danST 50mm trumpet kit

Write a review

Note: HTML is not translated!
   Bad           Good

Universal Intake Velocity Stack Trumpet, 45mmDia, Flange Mount,

  • £17.50

  • Ex Tax:£17.50

Available Options


Related Products

Velocity Stack Trumpet, 40mm Dia, 90mm Long, Universal Fitment with Joining Cuff

Velocity Stack Trumpet, 40mm Dia, 90mm Long, Universal Fitment with Joining Cuff

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet complete ..

£15.83 Ex Tax:£15.83

Velocity Stack Trumpet, 45mm Dia, 50mm Long, Universal Fitment with Joining Cuff

Velocity Stack Trumpet, 45mm Dia, 50mm Long, Universal Fitment with Joining Cuff

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet complete ..

£15.83 Ex Tax:£15.83

Velocity Stack Trumpet, 50mm Dia, 50mm long, Universal Fitment with Joining Cuff

Velocity Stack Trumpet, 50mm Dia, 50mm long, Universal Fitment with Joining Cuff

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet complete ..

£15.83 Ex Tax:£15.83

Velocity Stack Trumpet, 45mm Dia, 90mm Long, Universal Fitment with Joining Cuff

Velocity Stack Trumpet, 45mm Dia, 90mm Long, Universal Fitment with Joining Cuff

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet complete ..

£15.83 Ex Tax:£15.83

Velocity Stack Trumpet, 50mm Dia, 90mm Long, Universal Fitment with Joining Cuff

Velocity Stack Trumpet, 50mm Dia, 90mm Long, Universal Fitment with Joining Cuff

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet complete ..

£15.83 Ex Tax:£15.83

Velocity Stack Trumpet, 40mm Dia, 50mm Long, Universal Fitment with Joining Cuff

Velocity Stack Trumpet, 40mm Dia, 50mm Long, Universal Fitment with Joining Cuff

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet complete ..

£15.83 Ex Tax:£15.83

Non-flanged Trumpet 45mm Diameter  ALL LENGTHS

Non-flanged Trumpet 45mm Diameter ALL LENGTHS

This trumpet does not come with a flange or joining cuff. This is perfect for custom fabrications. ..

£12.50 Ex Tax:£12.50

Velocity Stack Trumpet, 50mm Dia, Universal Fitment non-flanged, All Lengths

Velocity Stack Trumpet, 50mm Dia, Universal Fitment non-flanged, All Lengths

This is a plain trumpet with no flange or joining cuff. They are plain parallel bore trumpets Perfec..

£12.50 Ex Tax:£12.50

Velocity Stack Trumpet, 40mm Dia, Universal Fitment non-flanged, All Lengths

Velocity Stack Trumpet, 40mm Dia, Universal Fitment non-flanged, All Lengths

This is a plain trumpet with no flange or joining cuff. They are plain parallel bore trumpets Perfec..

£12.50 Ex Tax:£12.50

Velocity Stack Trumpet, 45mm Dia, Universal Fitment non-flanged, All Lengths

Velocity Stack Trumpet, 45mm Dia, Universal Fitment non-flanged, All Lengths

This is a plain trumpet with no flange or joining cuff. They are plain parallel bore trumpets Perfec..

£12.50 Ex Tax:£12.50

Tags: Trumpet, Velocity Stack, Weber, Jenvey