danST Engineering are pleased to offer this high quality velocity stack kit for Kawasaki ZX9R Carburettors. Suitable for all ZX9R carburettors marked 'CVK' (this marking will be cast into the side of the carburettors). The kit consists of the following:

 

4x Flange fitment 40mm Diameter Spun Aluminium trumpets 50mm or 90mm tall (use the drop down menu to specify)

4x Adapter Plates

4x Adapter Collars

8x M6 Button Head Screws

8x M5 Countersunk Screws

 

Please note that the maximum length for custom trumpets is 90mm.

This kit has been designed for anyone running the bike carburettors without the original airbox arrangement - particularly in kit or modified car applications.

A pipercross PX500 or PX600 with the appropriate baseplate can be incorporated into the kit if desired.

25mm Velocity Stack = C502D Air Filter

50mm Velocity Stack = C504D Air Filter

90mm Velocity Stack = C604D Air Filter

Please contact us for further information and fitment options.

Below are links to two different engines fitted with two popular bike carb kits (one 1800 zetec with R1 Mikuni carbs, one Ford 2.3 Duratec fitted with ZX9R carbs). The lower lines are both carb sets without trumpets and the higher lines are when fitted with our 50mm trumpets. In both cases significant performance increases (typically 5-9bhp) are seen between 3500-6000rpm when the carburettors are fitted with our trumpet kit. Additionally the torque curve is seen to be much smoother. Note that the Duratec is making peak power very low in the RPM range due to a very restrictive exhaust (soon to be replaced!), but the effect of the trumpets on engine performance is clear. We see so many bike carb conversions running without any trumpets (bike breakers often remove them along with the original bike airbox) - ALL of which would see the benefits highlighted below, probably the cheapest power you can find!

 

1800 Zetec on 40mm R1 Carbs, no trumpets vs danST 50mm trumpet kit

2300 Ford Duratec ZX9R Carbs, no trumpets vz danST 50mm trumpet kit

 

NOTE! Please check your carburettor type is as described and shown in the photographs. If in doubt regarding fitments please contact us.

Write a review

Note: HTML is not translated!
   Bad           Good

Velocity Stack Kit for ZX9R (Keihin CVK) Carburettors

  • £125.00

  • Ex Tax:£125.00

Available Options


Related Products

Suzuki Swift GTI G13B Inlet Manifold for ZX7R & ZX9R Carburettors

Suzuki Swift GTI G13B Inlet Manifold for ZX7R & ZX9R Carburettors

An Inlet Manifold for fitment to the Suzuki Swift 1.3 GTI engine. TIG welded in aluminium and f..

£200.00 Ex Tax:£200.00

Pipercross PX600 Baseplate to suit Early ZX9R 'B' model Carburettors with danST Trumpet Kit

Pipercross PX600 Baseplate to suit Early ZX9R 'B' model Carburettors with danST Trumpet Kit

1.6mm thick aluminium base plate to suit the early 'B model ZX9R Carbs (spacings are 75mm - 75mm - 7..

£35.00 Ex Tax:£35.00

Pipercross PX600 Baseplate to suit ZX7R/ZX9R Carburettors with danST Trumpet Kit

Pipercross PX600 Baseplate to suit ZX7R/ZX9R Carburettors with danST Trumpet Kit

1.6mm thick aluminium base plate to suit Kawasaki ZX7 and ZX9R Carbs (spaced 78-87-78mm) fitted..

£35.00 Ex Tax:£35.00

Pipercross PX500 Baseplate to suit Early ZX9R 'B' model Carburettors with danST Trumpet Kit

Pipercross PX500 Baseplate to suit Early ZX9R 'B' model Carburettors with danST Trumpet Kit

1.6mm thick aluminium base plate to suit the early 'B model ZX9R Carbs (spacings are 75mm - 75mm - 7..

£35.00 Ex Tax:£35.00

Pipercross PX500 Baseplate to suit ZX7R/ZX9R Carburettors with danST Trumpet Kit

Pipercross PX500 Baseplate to suit ZX7R/ZX9R Carburettors with danST Trumpet Kit

1.6mm thick aluminium base plate to suit Kawasaki ZX7 and ZX9R Carbs (spaced 78-87-78mm) fitted..

£35.00 Ex Tax:£35.00

Pipercross PX500 Baseplate to suit Toyota 4AGE 20v Silvertop throttle bodies

Pipercross PX500 Baseplate to suit Toyota 4AGE 20v Silvertop throttle bodies

1.6mm thick aluminium base plate to suit the Toyota 4AGE 20v silvertop throttle bodies (spacing..

£35.00 Ex Tax:£35.00

Pipercross PX500 Baseplate to suit Toyota 4AGE 20v Blacktop throttle bodies

Pipercross PX500 Baseplate to suit Toyota 4AGE 20v Blacktop throttle bodies

1.6mm thick aluminium base plate to suit the Toyota 4AGE 20v Blacktop throttle bodies (spa..

£35.00 Ex Tax:£35.00

Pipercross PX600 Baseplate to suit Toyota 4AGE 20v Silvertop throttle bodies

Pipercross PX600 Baseplate to suit Toyota 4AGE 20v Silvertop throttle bodies

1.6mm thick aluminium base plate to suit the Toyota 4AGE 20v silvertop throttle bodies (spacing..

£35.00 Ex Tax:£35.00

Pipercross PX600 Baseplate to suit Toyota 4AGE 20v Blacktop throttle bodies

Pipercross PX600 Baseplate to suit Toyota 4AGE 20v Blacktop throttle bodies

1.6mm thick aluminium base plate to suit the Toyota 4AGE 20v Blacktop throttle bodies (spacings..

£35.00 Ex Tax:£35.00

Suzuki Jimny M13A and M15A Inlet Manifold for ZX7R & ZX9R Carburettors

Suzuki Jimny M13A and M15A Inlet Manifold for ZX7R & ZX9R Carburettors

An Inlet Manifold for fitment to the Suzuki Jimny and Ignis 1.3 and 1.5 engines. TIG welde..

£200.00 Ex Tax:£200.00

CLEARANCE SA-0017. Suzuki Jimny M13A and M15A Inlet Manifold for GSXR600 Throttle Bodies

CLEARANCE SA-0017. Suzuki Jimny M13A and M15A Inlet Manifold for GSXR600 Throttle Bodies

An Inlet Manifold for fitment to the Suzuki Jimny and Ignis 1.3 and 1.5 engines. TIG welde..

£150.00 Ex Tax:£150.00

Tags: Trumpet, Velocity Stack, ZX6R