An Inlet Manifold for fitment to the 1300 Ford Crossflow Engine, TIG welded in aluminium and fully internally ground to ensure optimum flow and performance.

The runners on this manifold are to suit the ZX6R carburettor spacings (Please check your carbs are spaced 75mm - 75mm - 75mm prior to purchasing this manifold). All of our manifolds are designed to mount the carburettors at the correct angle to ensure the floats function correctly in their bowls. Ideal for anyone who has already sourced a set of Keihin ZX6R carburettors for their Crossflow project. Suitable for all 1300 Crossflow engines. This manifold is specific to the 1300 crossflow and is designed to lift the carbs higher to avoid the distributor cap (being a shorter block than the 1600. NOTE! a 90 degree distributor cap will be required to ensure the manifold clears the ignition leads - please check that this cap is available for your distributor type.

 

Also suitable for use with early ZX9R carbs and some model CBR600 carbs (with above spacings)

Manifolds come complete with coolant connections (where applicable) as standard and a brake servo connection on the runner nearest the gearbox. Please use the check box options to specify the number of vacuum connections you require (servo connection will be supplied with a blanking plug if the manifold is specified without).

 

This item is made to order and therefore on a 10 working day lead time. If you require any additional vacuum take-offs adding to the manifold or a coolant connection these are easily added - please contact us.

Bike carburettor tuning services.

 

danST Engineering are pleased to be able to offer bike carburettor diagnostic and set-up services using our in house chassis dynamometer (rolling road) based in Shipley, West Yorkshire. Please drop us a message to discuss your requirements. 

 

Write a review

Note: HTML is not translated!
   Bad           Good

Ford 1300 Crossflow Inlet Manifold for ZX6R, ZX9R & CBR600 Carburettors

  • £200.00

  • Ex Tax:£200.00

Related Products

Ford Pinto Inlet Manifold Flange Plate ALUMINIUM

Ford Pinto Inlet Manifold Flange Plate ALUMINIUM

Inlet manifold flange to suit the Ford 1.6/1.8/2.0 Pinto SOHC engine. Available in either&..

£48.75 Ex Tax:£48.75

Silicone Hose 40mm Fitting Kit for Bike Carbs or Throttle Bodies BLUE

Silicone Hose 40mm Fitting Kit for Bike Carbs or Throttle Bodies BLUE

Fitting kit for bike carbs or bike throttle bodies suitable for ZX6R, ZZR600, CBR600, ..

£26.67 Ex Tax:£26.67

Silicone Hose 40mm Fitting Kit for Bike Carbs or Throttle Bodies BLACK

Silicone Hose 40mm Fitting Kit for Bike Carbs or Throttle Bodies BLACK

Fitting kit for bike carbs or bike throttle bodies suitable for ZX6R, ZZR600, CBR600, GSXR..

£26.67 Ex Tax:£26.67

Silicone Hose 40mm Fitting Kit for Bike Carbs or Throttle Bodies RED

Silicone Hose 40mm Fitting Kit for Bike Carbs or Throttle Bodies RED

Fitting kit for bike carbs or bike throttle bodies suitable for ZX6R, ZZR600, CBR600,..

£26.67 Ex Tax:£26.67

Ford 1.3/1.6 Heavy Duty Crossflow XFLOW INLET Manifold Gasket, Bike Carbs

Ford 1.3/1.6 Heavy Duty Crossflow XFLOW INLET Manifold Gasket, Bike Carbs

1mm thick Novus inlet manifold gasket to suit the Ford 1.3/1.6 Crossflow engine. An ideal ac..

£15.00 Ex Tax:£15.00

Mazda MX5 NA 1.6 Heavy Duty INLET Manifold Gasket, Bike Carbs

Mazda MX5 NA 1.6 Heavy Duty INLET Manifold Gasket, Bike Carbs

1mm thick Novus inlet manifold gasket to suit the Mazda MX5 1.6 mk1 and mk2 engine. An ..

£15.00 Ex Tax:£15.00

Mazda MX5 1.8 NA Mk1 Heavy Duty INLET Manifold Gasket, Bike Carbs

Mazda MX5 1.8 NA Mk1 Heavy Duty INLET Manifold Gasket, Bike Carbs

1mm thick Novus inlet manifold gasket to suit the Mazda MX5 1.8 Mk1 engine. An ideal ac..

£15.00 Ex Tax:£15.00

Ford CrossFlow Inlet manifold to suit Weber/Jenvey DCOE Throttle Bodies, 20deg

Ford CrossFlow Inlet manifold to suit Weber/Jenvey DCOE Throttle Bodies, 20deg

An Inlet Manifold for fitment to the Ford CrossFlow engine. TIG welded in aluminium and fully i..

£245.00 Ex Tax:£245.00

Tags: Ford, Crossflow, ZX6R