This individual throttle body kit for fitment to the Ford & Mazda 2.5 Duratec Engine. 50mm DCOE Individual throttle bodies (an ideal size for the 2.5 unit). 


The kit comprises;

4 x 50mm DCOE Throttle Bodies (spaced to achieve equal length runners on the manifold)

Bosch Injectors (please refer to the options at the side of this listing)

Fuel Rail (please refer to the options at the side of this listing)

Bosch style 3 pin Throttle Position Sensor

Inlet Manifold (TIG welded and fully internally ground for smooth flow and optimum performance)

25mm, 50mm or 90mm Long Trumpets.(Please specify when ordering)

Pipercross Air Filter and Baseplate

Throttle Linkage and Cable Kit

Motorsport Electronics ME221 Standalone ECU with Terminated Duratec Loom

Air Temperature Sensor

Coolant Temperature Sensor and 32mm Housing

Sytec Fuel Pressure Regulator 

Sytec Fuel Filter

Sytec Fuel Pressure Gauge

Bosch Hi-Flow EFI Fuel Pump

Wasted spark supplement pack, including custom length HT leads and coil pack incorporated onto a custom oil breather plate.


Our manifold is a TIG welded aluminium construction with precision machined gasket surfaces and fully internally ground to ensure optimum flow and performance. The fuel rail supplied is a single piece (not the typical twin type with fuel hose in between or the leak-prone O-ring type). 

 

The manifold includes a single servo connection - these can be blanked off if not required, please advise when ordering.

This item is made to order and therefore on a 10 working day lead time. If you require any additional vacuum take-offs adding to the manifold, these are easily added - please contact us.


This kit achieved 217hp and 225lb//ft with the help of a free flowing exhaust on our otherwise stock 2.5 Duratec (unknown engine mileage) when back to back tested on our in-house rolling road. With a set of cams (please see a separate listing) 250bhp is easily achievable.


Options:


We offer a multitude of options with our DCOE ITB kits to give the customer complete flexibility when specifying their build. The notes below give a detailed explanation of the drop down and/or tick-box options we offer.

For basic fast road applications on a budget, if already present, the OEM Duratec fuel rail, regulator and injectors can be retained This greatly reduces the cost and complexity of changing fuel lines, injectors and then blanking the cylinder head injector holes. However ITB mounted injectors can give slightly more peak power and do become more advantageous when the engine spec grows (cams, ported head etc). 


Injectors: We offer various capacity injector options, all of which are genuine Bosch items. However if using your own injectors these can be negated.


Fuel Rail Type: We offer various fuel rail options. If 'no fuel rail' is specified then it is assumed that you will be using the OEM rail on the cylinder head and bungs will be provided for the throttle body injector holes. Alternatively the standard 2 piece DCOE fuel rail can be supplied with a short length of fuel hose and clamps to join the two. This fuel rail has standard 8mm push on hose fittings at each end, There are no other connections are available on this type of fuel rail. However we also offer an upgrade to our billet single piece fuel rail - this can be supplied with the same 8mm push fit, 6AN fittings or OEM quick connect (See end termination options). IF you are using your OEM fuel rail and injectors, or the two piece standard DCOE fuel rail you do not need to do anything with the end termination options.


Diameter (Internal): Please specify the diameter of the throttle bodies you require. Trumpets and manifold will be sized to match.


Engine Fitment: Please specify the engine type for manifold fitment.


Trumpet Length: Please specify the trumpet length required based on your space requirements. The air filter will be sized accordingly. If in any doubt please contact us and we will be happy to advise based on our experience.


Vehicle Fitment: Due to the huge variation in vehicles that these engines are fitted to please tell us in the notes during checkout any details about your specific project. Whilst we cannot guarantee to have dealt with your specific application it can sometimes help us in determining the best configuration of certain parts.


Our manifold is a TIG welded aluminium construction with precision machined gasket surfaces and fully internally ground to ensure optimum flow and performance. 

The manifold includes a single servo connection - these can be blanked off if not required, please advise when ordering.

 

Technical drawings are available on request and custom lengths and heights can be accommodated, please message us with your requirements.

 

This item is made to order and therefore on a 10 working day lead time (depending on options selected). If you require any additional vacuum take-offs adding to the manifold or a coolant connection these are easily added - please contact us.



Write a review

Note: HTML is not translated!
   Bad           Good

Ford/Mazda Duratec 2.5 - 50mm DCOE ULTIMATE ROAD Individual Throttle Body Kit

  • £2,100.00

  • Ex Tax:£2,100.00

Available Options


Related Products

Ford Duratec 1.8/2.0/2.3 Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

Ford Duratec 1.8/2.0/2.3 Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford Durate..

£1,600.00 Ex Tax:£1,600.00

ME221 Standalone Fuel Injection ECU, Ford Zetec Plug and Play Pack

ME221 Standalone Fuel Injection ECU, Ford Zetec Plug and Play Pack

ME221 Standalone Fuel Injection ECU, Ford Zetec Plug and Play Pack The ME221 Wire-In ECU is a fea..

£745.82 Ex Tax:£745.82

Ford Duratec Inlet manifold to suit Weber/Jenvey DCOE Throttle bodies, 15deg

Ford Duratec Inlet manifold to suit Weber/Jenvey DCOE Throttle bodies, 15deg

An inlet manifold to suit the Ford Duratec engine. TIG welded in aluminium and fully internally grou..

£245.00 Ex Tax:£245.00

Ford RS2000 2.0 Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

Ford RS2000 2.0 Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford RS2000..

£1,600.00 Ex Tax:£1,600.00

Ford Duratec 1.8/2.0/2.3 Inlet Inverter Adapter Plate

Ford Duratec 1.8/2.0/2.3 Inlet Inverter Adapter Plate

10mm thick 5053 Aluminium CNC machined inlet manifold adapter plate to suit the Ford Duratec en..

£83.33 Ex Tax:£83.33

Ford Duratec 2.5 Complete, Bare Tall Engine

Ford Duratec 2.5 Complete, Bare Tall Engine

We keep in stock bare Ford/Mazda 2.5 Duratec HE tall engines. These used engine units are imported f..

£1,100.00 Ex Tax:£1,100.00

Ford Fiesta ST150 2.0 Duratec Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

Ford Fiesta ST150 2.0 Duratec Bike Throttle Bodies Kit ZX10R 44mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford Fiesta ST15..

£1,600.00 Ex Tax:£1,600.00

Ford Duratec Inlet manifold to suit Weber/Dellorto DCOE Carburettors

Ford Duratec Inlet manifold to suit Weber/Dellorto DCOE Carburettors

An inlet manifold to suit the Ford Duratec engine. TIG welded in aluminium and fully internally grou..

£245.00 Ex Tax:£245.00

Ford Duratec 2.5L Inlet manifold to suit Weber/Dellorto DCOE Carburettors

Ford Duratec 2.5L Inlet manifold to suit Weber/Dellorto DCOE Carburettors

An inlet manifold to suit the Ford Duratec 2.5L engine. TIG welded in aluminium and fully internally..

£245.00 Ex Tax:£245.00

Ford Duratec 2.0L SHORT Inlet manifold to suit Weber/Jenvey type DCOE's, Fiesta ST150

Ford Duratec 2.0L SHORT Inlet manifold to suit Weber/Jenvey type DCOE's, Fiesta ST150

A short inlet manifold to suit the Ford Duratec 2.0L engine (will also fit 2.3L) as fitted to the Fi..

£245.00 Ex Tax:£245.00

Duratec 2.5 Ported and Polished Cylinder Head

Duratec 2.5 Ported and Polished Cylinder Head

This Ford Duratec 2.5 cylinder head has been to a cylinder head specialist to maximise the velocity ..

£900.00 Ex Tax:£900.00

Ford 2.3 Duratec Bike Throttle Bodies Kit GSXR1300 46mm *FAST ROAD PACK*

Ford 2.3 Duratec Bike Throttle Bodies Kit GSXR1300 46mm *FAST ROAD PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford 2.3 Duratec..

£1,600.00 Ex Tax:£1,600.00

Ford & Mazda Duratec Aluminium Cam Cover - suits all VVT variants including 2.5

Ford & Mazda Duratec Aluminium Cam Cover - suits all VVT variants including 2.5

Aluminium Ford Duratec cam cover to suit all VVT models of this popular engine including the 2.5 fou..

£141.67 Ex Tax:£141.67

Ford RS2000 2.0 Bike Throttle Bodies Kit ZX10R 44mm *STARTER PACK*

Ford RS2000 2.0 Bike Throttle Bodies Kit ZX10R 44mm *STARTER PACK*

danST Engineering are pleased to be able to offer this complete bolt on kit for the Ford RS2000..

£764.17 Ex Tax:£764.17

Ford ST170 2.0 Complete, Bare Tall Engine

Ford ST170 2.0 Complete, Bare Tall Engine

We keep in stock used bare Ford 2.0 ST170 tall engines.Ideal for anyone upgrading an old classic For..

£500.00 Ex Tax:£500.00

Tags: Duratec, Mazda, fiesta ST, ST150, 2.0, 2.3, 2.5, Ford, Mondeo, Focus, MGZR, Fusion, Ranger, ITB, throttle bodies,