danST Engineering are pleased to offer this high quality velocity stack kit for suzuki GSXR600 throttle bodies. The kit consists of the following:

 

4x Flange fitment 40mm Diameter Spun Aluminium trumpets available in 25/50/90mm lengths

4x Clamp Rings with Inside Diameter 45.6mm and Outside Diameter of 75mm

8x M6 Button Head Screws

4x M5 Grub Screws

 

This kit has been designed for anyone running the bike throttle bodies without the original airbox arrangement - particularly in kit or modified car applications.

A pipercross PX500 or PX600 with the appropriate baseplate can be incorporated into the kit if desired. Please contact us for further information and fitment options.

 

NOTE! Please measure and ensure your throttle bodies have an outside diameter of 44-45mm at the inlet where the clamp rings will slot over. This kit may be suitable for other throttle bodies with the same measurement.

Below are links to two different engines fitted with two popular bike carb kits (one 1800 zetec with R1 Mikuni carbs, one Ford 2.3 Duratec fitted with ZX9R carbs). The lower lines are both carb sets without trumpets and the higher lines are when fitted with our 50mm trumpets. In both cases significant performance increases (typically 5-9bhp) are seen between 3500-6000rpm when the carburettors are fitted with our trumpet kit. Additionally the torque curve is seen to be much smoother. Note that the Duratec is making peak power very low in the RPM range due to a very restrictive exhaust (soon to be replaced!), but the effect of the trumpets on engine performance is clear. We see so many bike carb conversions running without any trumpets (bike breakers often remove them along with the original bike airbox) - ALL of which would see the benefits highlighted below, probably the cheapest power you can find!

 

1800 Zetec on 40mm R1 Carbs, no trumpets vs danST 50mm trumpet kit

2300 Ford Duratec ZX9R Carbs, no trumpets vz danST 50mm trumpet kit

 

Should you have another throttle body diameter please contact us - we may be able to make a similar kit to suit

Write a review

Note: HTML is not translated!
   Bad           Good

Velocity Stack Kit for GSXR600 K1-K3 Throttle Bodies, ALL LENGTHS

  • £125.00

  • Ex Tax:£125.00

Available Options


Related Products

Velocity Stack Kit for GSXR750, GSXR1000 & GSXR1300 Throttle Bodies, All lengths

Velocity Stack Kit for GSXR750, GSXR1000 & GSXR1300 Throttle Bodies, All lengths

danST Engineering are pleased to offer this high quality velocity stack kit for suzuki GSXR750/1000/..

£125.00 Ex Tax:£125.00

Velocity Stack Kit for ZX12R Throttle Bodies All lengths

Velocity Stack Kit for ZX12R Throttle Bodies All lengths

danST Engineering are pleased to offer this high quality velocity stack kit for the Kawasaki ZX..

£125.00 Ex Tax:£125.00

Velocity Stack Kit for Triumph TT600 Throttle Bodies All Lengths

Velocity Stack Kit for Triumph TT600 Throttle Bodies All Lengths

danST Engineering are pleased to offer this high quality velocity stack kit for Triumph TT600 t..

£95.83 Ex Tax:£95.83

Velocity Stack Clamp Rings for GSXR600/750 Throttle Bodies, 45.6mm Dia

Velocity Stack Clamp Rings for GSXR600/750 Throttle Bodies, 45.6mm Dia

danST Engineering are pleased to offer this high quality CNC machined clamp ring kit for Suzuki..

£37.50 Ex Tax:£37.50

Velocity Stack Kit for 4AGE 20v Silvertop Throttle Bodies, all lengths

Velocity Stack Kit for 4AGE 20v Silvertop Throttle Bodies, all lengths

danST Engineering are pleased to offer this high quality velocity stack kit for the Toyota 4AGE 20v ..

£125.00 Ex Tax:£125.00

Velocity Stack Kit for 4AGE 20v Blacktop Throttle Bodies, all lengths

Velocity Stack Kit for 4AGE 20v Blacktop Throttle Bodies, all lengths

danST Engineering are pleased to offer this high quality velocity stack kit for the Toyota 4AGE 20v ..

£125.00 Ex Tax:£125.00

Velocity Stack Kit for GSXR750 SRAD Throttle Bodies All Lengths

Velocity Stack Kit for GSXR750 SRAD Throttle Bodies All Lengths

danST Engineering are pleased to offer this high quality velocity stack kit for suzuki GSXR750 SRAD ..

£125.00 Ex Tax:£125.00

Pipercross PX500 Baseplate to suit GSXR600 K1-K3 Throttle Bodies with danST Trumpet Kit

Pipercross PX500 Baseplate to suit GSXR600 K1-K3 Throttle Bodies with danST Trumpet Kit

1.6mm thick aluminium base plate to suit GSXR600 K1-K3 throttle bodies when fitted with our pop..

£35.00 Ex Tax:£35.00

Pipercross PX600 Baseplate to suit GSXR600 K1-K3 Throttle Bodies with danST Trumpet Kit

Pipercross PX600 Baseplate to suit GSXR600 K1-K3 Throttle Bodies with danST Trumpet Kit

1.6mm thick aluminium base plate to suit GSXR600 K1-K3 throttle bodies (spacings are 80mm - 80m..

£35.00 Ex Tax:£35.00

Velocity Stack Kit for ZX10R K4-K5 Throttle Bodies All lengths

Velocity Stack Kit for ZX10R K4-K5 Throttle Bodies All lengths

danST Engineering are pleased to offer this high quality velocity stack kit for Kawasaki ZX10R ..

£125.00 Ex Tax:£125.00

Velocity Stack Kit for ZX14R Throttle Bodies All lengths

Velocity Stack Kit for ZX14R Throttle Bodies All lengths

danST Engineering are pleased to offer this high quality velocity stack kit for Kawasaki ZX10R ..

£125.00 Ex Tax:£125.00

Velocity Stack Kit for GSXR600 K4-K5 Throttle Bodies, ALL LENGTHS

Velocity Stack Kit for GSXR600 K4-K5 Throttle Bodies, ALL LENGTHS

danST Engineering are pleased to offer this high quality velocity stack kit for suzuki GSXR600 K4-K5..

£125.00 Ex Tax:£125.00

Tags: Trumpet, Velocity Stack, K1, GSXR600