Your shopping cart is empty!
danST Engineering are pleased to offer this high quality velocity stack kit for Kawasaki ZX10R throttle bodies. The kit consists of the following:
4x Flange fitment 50mm Diameter Spun Aluminium trumpets available in 25/50/90mm Lengths
4x Clamp Rings with Inside Diameter 55.4mm stepping down to 54.4mm and Outside Diameter of 75mm
8x M6 Button Head Screws
4x M6 Grub Screws
A dimensional drawing of the available trumpet sizes can be seen here: Velocity Stack Dimension Drawing
This kit has been designed for anyone running the bike throttle bodies without the original airbox arrangement - particularly in kit or modified car applications.
A pipercross PX500 or PX600 with the appropriate baseplate can be incorporated into the kit if desired. Please contact us for further information and fitment options.
NOTE! Please measure and ensure your throttle bodies have an outside diameter of 54-56mm at the inlet where the clamp rings will slot over. This kit may be suitable for other throttle bodies with the same measurement.
Below are links to two different engines fitted with two popular bike carb kits (one 1800 zetec with R1 Mikuni carbs, one Ford 2.3 Duratec fitted with ZX9R carbs). The lower lines are both carb sets without trumpets and the higher lines are when fitted with our 50mm trumpets. In both cases significant performance increases (typically 5-9bhp) are seen between 3500-6000rpm when the carburettors are fitted with our trumpet kit. Additionally the torque curve is seen to be much smoother. Note that the Duratec is making peak power very low in the RPM range due to a very restrictive exhaust (soon to be replaced!), but the effect of the trumpets on engine performance is clear. We see so many bike carb conversions running without any trumpets (bike breakers often remove them along with the original bike airbox) - ALL of which would see the benefits highlighted below, probably the cheapest power you can find!
1800 Zetec on 40mm R1 Carbs, no trumpets vs danST 50mm trumpet kit
2300 Ford Duratec ZX9R Carbs, no trumpets vz danST 50mm trumpet kit
Should you have another throttle body diameter please contact us - we may be able to make a similar kit to suit
0 reviews / Write a review
danST Engineering are pleased to offer this high quality velocity stack kit for suzuki GSXR600 throt..
£125.00 Ex Tax:£125.00
danST Engineering are pleased to offer this high quality velocity stack kit for Yamaha R1 5PW t..
£110.00 Ex Tax:£110.00
High performance 6063T6 billet aluminium fuel rail to suit the Suzuki GSXR1000 (k1-k2) throttle bodi..
£100.00 Ex Tax:£100.00
High performance 6063T6 billet aluminium fuel rail to suit the Suzuki GSXR600 (k1-k3) throttle bodie..
£120.00 Ex Tax:£120.00
1.6mm thick aluminium base plate to suit Suzuki GSXR1000 K1-K4 throttle bodies when fitted with our ..
£35.00 Ex Tax:£35.00
1.6mm thick aluminium base plate to suit Honda GSXR1000 K9 throttle bodies when fitted with ou..
1.6mm thick aluminium base plate to suit Suzuki GSXR1300 Gen1 throttle bodies when fitted with our p..
1.6mm thick aluminium base plate to suit Honda GSXR1300 Gen1 throttle bodies when fitted with our po..
An Inlet Manifold for fitment to the Vauxhall X16XE engine, TIG welded in aluminium and fu..
£225.00 Ex Tax:£225.00
Tags: Trumpet, Velocity Stack, Weber, Jenvey