danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet kit for fitment to Yamaha 4XV R1 Carburettors. Complete with universal Cuff and clips fitting kit. The kit includes:

 

4x40mm bore trumpets available in 25/50/90mm lengths

4 x 2 Ply 40mm diameter black Silicone Joining Cuffs 

9mm wide stainless mikalor clamps (x8)

(carburettors are NOT included, shown for illustration only) 

Check for clearance prior to ordering air filter, as this will warrant a return fee!

25mm Velocity Stack = C503D Air Filter

50mm Velocity Stack = C504D Air Filter

90mm Velocity Stack = C604D Air Filter

danST Engineering began manufacturing these trumpets due to a shortage of available and reasonably priced trumpets for fitment on our specialist carb and throttle body conversions. 

Why fit velocity stacks or 'trumpets'? A radius at the inlet of an inlet tract serves to smooth and even out the flow into each intake runner. You will note that any manufacturers standard equipment will feature such a radius for this reason. Without this radius power and torque can both be negatively affected. Additionally when tuning for power increases a longer inlet tract (the distance from inlet to back of valve being the important length) has been found to be extremely beneficial, especially on a lower revving car engine.

Below are links to two different engines fitted with two popular bike carb kits (one 1800 zetec with R1 Mikuni carbs, one Ford 2.3 Duratec fitted with ZX9R carbs). The lower lines are both carb sets without trumpets and the higher lines are when fitted with our 50mm trumpets. In both cases significant performance increases (typically 5-9bhp) are seen between 3500-6000rpm when the carburettors are fitted with our trumpet kit. Additionally the torque curve is seen to be much smoother. Note that the Duratec is making peak power very low in the RPM range due to a very restrictive exhaust (soon to be replaced!), but the effect of the trumpets on engine performance is clear. We see so many bike carb conversions running without any trumpets (bike breakers often remove them along with the original bike airbox) - ALL of which would see the benefits highlighted below, probably the cheapest power you can find!

 

1800 Zetec on 40mm R1 Carbs, no trumpets vs danST 50mm trumpet kit

2300 Ford Duratec ZX9R Carbs, no trumpets vz danST 50mm trumpet kit

 

 

Write a review

Note: HTML is not translated!
   Bad           Good

Velocity Stack Kit for Yamaha R1 4XV Carburettor, All Lengths

  • £80.00

  • Ex Tax:£80.00

Available Options


Related Products

Pipercross PX600 Baseplate to suit R1 Carburettors

Pipercross PX600 Baseplate to suit R1 Carburettors

1.6mm thick aluminium base plate to suit Yamaha R1 Carbs allowing fitment of the Pipercross PX6..

£35.00 Ex Tax:£35.00

Pipercross PX500 Baseplate to suit R1 Carburettors

Pipercross PX500 Baseplate to suit R1 Carburettors

1.6mm thick aluminium base plate to suit Yamaha R1 Carbs allowing fitment of the Pipercross PX5..

£35.00 Ex Tax:£35.00

Pipercross PX500 Baseplate to suit YZF600 Thundercat Carburettors

Pipercross PX500 Baseplate to suit YZF600 Thundercat Carburettors

1.6mm thick aluminium base plate to suit YZF600 Carbs allowing fitment of the Pipercross PX500 ..

£35.00 Ex Tax:£35.00

Pipercross PX500 Baseplate to suit ZZR1100 Carburettors

Pipercross PX500 Baseplate to suit ZZR1100 Carburettors

1.6mm thick aluminium base plate to suit ZZR1100 Carbs allowing fitment of the Pipercross PX500..

£35.00 Ex Tax:£35.00

Pipercross PX500 Baseplate to suit Early ZX9R 'B' model Carburettors

Pipercross PX500 Baseplate to suit Early ZX9R 'B' model Carburettors

1.6mm thick aluminium base plate to suit the early ZX9R 'B' model Carbs allowing fitment of the..

£35.00 Ex Tax:£35.00

Pipercross PX600 Baseplate to suit YZF600 Thundercat Carburettors

Pipercross PX600 Baseplate to suit YZF600 Thundercat Carburettors

1.6mm thick aluminium base plate to suit YZF600 Carbs allowing fitment of the Pipercross PX600 ..

£35.00 Ex Tax:£35.00

Pipercross PX600 Baseplate to suit ZZR1100 Carburettors

Pipercross PX600 Baseplate to suit ZZR1100 Carburettors

1.6mm thick aluminium base plate to suit ZZR1100 Carbs allowing fitment of the Pipercross PX600..

£35.00 Ex Tax:£35.00

Tags: Trumpet, Velocity Stack,