Porsche 944 3.0 S2 & 968 Individual Throttle Body Kit

This individual throttle body kit for fitment to the Porsche 944 & 968 3.0 16v engine utilizes 50mm DCOE type individual throttle bodies (an ideal size for the 3.0 unit).

The kit consists of:

4 x 50mm DCOE type Throttle Bodies (spaced to achieve equal length runners on the manifold)

Inlet Manifold (TIG welded and fully internally ground for smooth flow and optimum performance)

Throttle Cable Linkage & throttle plate linkages

Throttle Position Sensor

Billet -6an Fuel Rail

Bosch style 3 pin Throttle Position Sensor

50mm Long Trumpets

Pipercross Pod filters

Porsche 944 Throttle Cable Kit

Bosch 550cc Injectors

Fuel Pressure Regulator (optional)

This kit unlocked 30bhp and 20-30lb//ft throughout the RPM range on our otherwise stock 1989 3.0 S2 (160k mile engine) when back to back tested on our in-house rolling road. Further gains are possible with a free flowing exhaust.

The manifold includes a single brake servo connection. This can be blanked off if not required, please advise when ordering. Likewise if additional connections are required we can do so for an additional cost.

This item is made to order and therefore on a 15 working day lead time.

FITTING NOTES:

Aftermarket engine management will be required to run this kit - see our other Porsche listings.

The fuel rail will be supplied with a single 8mm hosetail fitting to be piped as a 'dead-head' system. Should you have any other requirements in this regard please contact us when placing your order. It is advised to use our adjustable fuel pressure regulator (available as an option) to facilitate this, however any 3 bar fuel pressure regulator can be used.

This kit will fit around the standard Brake equipment, however the standard oil filler neck will need to be cut down and dog-legged (moved) to clear the throttle bodies.