danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet complete with universal fitting kit. Features:

 

50mm Bore (40mm and 45mm also available)

90mm Overall Length (50mm also available, see our other items)

78mm Outer Diameter at Radius End

Lightweight Aluminium Construction

Natural Polished Aluminum Finish

Discrete single-ply silicone joining cuff

2 x 9mm wide Stainless Mikalor Clips

 

danST Engineering began manufacturing these trumpets due to a shortage of available and reasonably priced trumpets for fitment on our specialist carb and throttle body conversions. These trumpets are suitable for a wide range of applications with cylindrical carburettor or throttle body inlet to allow the silicone to be clamped around. Note that the silicone will stretch 3-4mm to fit larger diameters.

 

Below are links to two different engines fitted with two popular bike carb kits (one 1800 zetec with R1 Mikuni carbs, one Ford 2.3 Duratec fitted with ZX9R carbs). The lower lines are both carb sets without trumpets and the higher lines are when fitted with our 50mm trumpets. In both cases significant performance increases (typically 5-9bhp) are seen between 3500-6000rpm when the carburettors are fitted with our trumpet kit. Additionally the torque curve is seen to be much smoother. Note that the Duratec is making peak power very low in the RPM range due to a very restrictive exhaust (soon to be replaced!), but the effect of the trumpets on engine performance is clear. We see so many bike carb conversions running without any trumpets (bike breakers often remove them along with the original bike airbox) - ALL of which would see the benefits highlighted below, probably the cheapest power you can find!

 

1800 Zetec on 40mm R1 Carbs, no trumpets vs danST 50mm trumpet kit

2300 Ford Duratec ZX9R Carbs, no trumpets vz danST 50mm trumpet kit

Write a review

Note: HTML is not translated!
   Bad           Good

Velocity Stack Trumpet, 50mm Dia, 90mm Long, Universal Fitment with Joining Cuff

  • £15.83

  • Ex Tax:£15.83

Related Products

Universal Intake Velocity Stack Trumpet, 50mm Dia, Flange Mount,

Universal Intake Velocity Stack Trumpet, 50mm Dia, Flange Mount,

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet. Features..

£17.50 Ex Tax:£17.50

Universal Intake Velocity Stack Trumpet, 45mmDia, Flange Mount,

Universal Intake Velocity Stack Trumpet, 45mmDia, Flange Mount,

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet. Features..

£17.50 Ex Tax:£17.50

Universal Intake Velocity Stack Trumpet, 40mmDia, Flange Mount,

Universal Intake Velocity Stack Trumpet, 40mmDia, Flange Mount,

danST Engineering are pleased to offer this high quality lightweight aluminum spun trumpet. Features..

£17.50 Ex Tax:£17.50

Tags: Trumpet, Velocity Stack, Weber, Jenvey