A universal CNC machined sensor bracket to suit the Ford 2 pin VR crank sensor as used on the Zetec E engine (and many others).

This bracket is designed to give an excellent starting point in mounting a crank sensor on an engine that did not previously have one. Typically you would be mounting this sensor to read a toothed triggerwheel on the front pulley of your engine The sensor should ideally be mounted 90 degrees before engine TDC (cylinder 1), however most aftermarket ECU's including our range of Motorsport Electronics products offer a trigger offset function that will compensate for any sensor position. This bracket gives a very good starting point for mounting the sensor to a suitable bracket coming off the engine block. Because the sensor is held with grub screws the radial gap from tooth to sensor can be fine adjusted with feeler gauges before being locked off. Further detail on the bracket can be seen here. 


Package Contents:


1 x CNC machined bracket

2 x Grub Screws

2 x M8x20 Screws



 

Write a review

Note: HTML is not translated!
   Bad           Good

Universal Crank Sensor Mounting Bracket - suits Ford Zetec 2 Pin VR

  • £20.00

  • Ex Tax:£20.00

Available Options


Related Products

Universal Trigger Wheel 140mm,  36-1 Crank Position, for Megajolt, Nodiz, Omex, ME221

Universal Trigger Wheel 140mm, 36-1 Crank Position, for Megajolt, Nodiz, Omex, ME221

3mm thick CNC laser cut mild steel trigger wheel for use with any engine management system that requ..

£19.99 Ex Tax:£19.99

Nodiz Pro Ignition ECU, Ford Zetec Plug and Play Pack (Gen X)

Nodiz Pro Ignition ECU, Ford Zetec Plug and Play Pack (Gen X)

PRELOOMED/PREMAPPED NODIZ ZETEC SYSTEM If you have the factory Coil Pack and Crank Sensor on your..

£275.00 Ex Tax:£275.00

Wasted Spark Supplement Pack for 4 cylinder distributor based engines

Wasted Spark Supplement Pack for 4 cylinder distributor based engines

Our 'Wasted Spark Supplement Pack' is a kit of parts to facilitate the updating of older distributor..

£74.16 Ex Tax:£74.16

Tags: zetec, crank, sensor, bracket, triggerwheel